Reason to change Spring guide for HW30

This is what you usually cannot see with naked eyes.

In the picture below, you see on the original (OEM) spring guide hof HW30 showing some bucking.

The reason is very simple. The OEM spring guide is way below the required OD size for the spring.

Secondly, the Material that used for the guide is not strong enough to hold the power of the spring.

This picture shows the custom made spring guide.

No bucking observed. Alignment of the tophat is not inline with the guide thus the little difference you see down there.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s

%d bloggers like this: